"Keep Warm" Function; Bridge Or Automatic Bridge Function; Control Panel Locking - F.Bertazzoni P906IM3G5NE Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

"Keep warm" Function

This function allows the reach and automatically maintains at the temperature of 42, 70 or 94°C.
This will avoid liquids overflowing and fast burning at the bottom of the pan.
• To engage, to start the function « Keep warm »:
Action
42°C to engage
70°C to engage
94°C to engage
To stop
The maximum duration of keeping warm is 2 hours.

Bridge or Automatic Bridge Function

This function allows the use of 2 cooking zones at the same time with the same features as a
single cooking zone. With this function the Booster function is allowed on the left and center
zones.
Action
Activate the hob
Activate the bridge
Increase bridge
Stop the bridge

Control panel locking

To avoid modification of the setting of the cooking zones, in particular during cleaning, the control
panel can be locked (with exception to the On/Off key [
Action
Activate the hob
Locking the hob
Unlock the hob
Control panel
Press once on key [
Press twice on key [
Press 3 times on key [
Slide on the "SLIDER"
Control panel
Press key [
] for 2 sec.
Place a pan on one of the two zones
that will be bridged and press
simultaneously the corresponding
selection keys
or
Automatically: put a great pan on the
2 zones and press on the 2 "SLIDER"
Slide on the "SLIDER"
witch indicates the power
Press simultaneously
of the 2 cooking zones
Control panel
Press key [
] for 2 sec.
Hold for 3s the key of an area then
press the "Slider" which scrolls and
swipe from left to right
Hold for 3s the key of an area then
press the "Slider" which scrolls and
swipe from left to right
13
Display
]
[ U ] and [
]
[ U ] and [
]
[ U ] and [
[ 0 ] to [ 9 ]
Display
[ 0 ]
[ 0 ] and [ ∏ ]
[ ∏ ] blink
[ ∏ ]
[ 1 ] to [ 9 ]
[ 0 ]
]).
Display
[ 0 ]
[ L ]
[ 0 ] ou [ H ]
]
]
]

Publicité

Table des Matières
loading

Table des Matières