Before Calling For Service - Bosch HBE5451UC Manuel D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour HBE5451UC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before Calling for Service

Before calling Customer Service, consider the
suggestions and instructions below:
WARNING
9
RISK OF ELECTRIC SHOCK
Incorrect repairs are dangerous.Repairs must only
be carried out by one of our trained customer
service technicians.
Incorrect repairs to your appliance may present
considerable risks for the user.
Fault
The appliance does not work. Faulty fuse
The oven cannot be switched
off.
The clock display flashes.
The oven does not heat.
The door glass is broken.
Fruit juice or albumen stains
on enameled surfaces.
The oven stops operating in
the middle of a program, and
the cooling fan continues to
run at high speed even when
function selector is set to Off
position. The buzzer sounds
intermittently and the control
lamp is flashing.
Possible cause
Notes/remedy
Look in the fuse box and check that the circuit breaker for the
range is in working order.
Power failure
Check whether the kitchen light works.
Electronics are
Switch off the circuit breaker. Call customer service.
faulty
Power failure
Reset the clock.
Faulty fuse
Check the fuse and replace if necessary.
Function selector
Set the function selector.
not set
Switch off the appliance. Call customer service.
Moist cake or meat
Harmless change in the enamel, cannot be removed.
juices
Problem with ther-
1.
mostat
2.
3.
Set function selector to Off position.
The cooling fan continues to run at high speed.
Wait for 10 seconds.
Set function selector to a new position.
If the error occurs again when setting a new function: Dis-
connect the oven from power supply, then reconnect power
supply.
If the error occurs again after reconnecting power supply:
Call customer service.
15

Publicité

Table des Matières
loading

Table des Matières