8. SERVICING
8.1 SECURITY INSTRUCTIONS FOR OPENING UP THE MACHINE
The CAD30 UxR is a "secure" terminal. It must not be opened by the user.
Only the SAM cover flap can be opened and closed by the user for routine servicing described in this
manual.
8.2 LITHIUM BATTERY
For the attention of maintenance services
Warning: This device contains a lithium cell battery. There is a risk of explosion if this cell is not correctly
replaced. Replace using only a battery cell that is the same type, or its equivalent as recommended by the
manufacturer.
Discard all used battery cells in compliance with current recycling legislation.
Only trained and authorized technicians are authorized to carry out any servicing for this component.
8.3 CLEANING THE OUTSIDE OF THE TERMINAL
•
Remove all cords from the terminal.
•
Use a soft cloth that is very slightly soaked with soapy water to clean the outside of the terminal.
9. SHIPPING AND STORAGE
•
Use the original packaging whenever shipping or storing the terminal.
24/28
INSTALLATION GUIDE
6000004316 R11 000 02/825