Reiner speed-i-Jet 798 Mode D'emploi Succint page 13

speed-i-Jet 798
2. Preparation
2.1 Insert batteries
Correct procedure
Open battery compartment
f
Ensure correct polarity and insert batteries.
f
Close battery compartment.
f
2.2 Charge batteries
Connect the mini-USB socket with the PC
f
Charging takes about 3 hours. The batteries are charged once the green charging
6
indicator is no longer illuminated.
The batteries do not reach their full capacity after they have been completely charged
for the first time. Full capacity is reached once the batteries have been completely
exhausted and recharged several times.
2.3 Insert print-head
Remove protective cap
f
Open print-head flap
f
Insert print-head.
f
Close print-head flap
f
The print-head needs to be changed when the print-out becomes weak
and incomplete.
5
.
7
via the USB cable.
2
.
3
.
3
.
GB
12