Intended Use - G-U SECURY 21 EK Notice De Montage

Installation instructions
SECURY 21 EK | 21 S
Multi-point locks electrically couplable or with monitoring contacts
2.7
SECURY 21 EK und 21 S multi-point locks are designed for vertically in-
stalled doors. Their main area of application is building entrance doors in
both private and public buildings.
The multi-point locks can be controlled and operated through a potential-
free contact (e.g. push-button, intercom, access control, time switch, etc.).
Through this contact, the plus potential (+) of the operating voltage for the
multi-point lock is switched on. As long as control takes place, the cor-
responding lever handles are coupled in or out (depending on the version,
operating current or quiescent current).
Compliance with the manufacturer's specifications, in particular the in-
structions in the supplied Assembly and Operating Instructions, belong to
intended use. Only in this way can damage be avoided.
Changes made to the multi-point lock without the approval of GU exclude
the manufacturer's liability for resulting damages.
The drive complies with the regulations of European Directives.
Conditions of use
„ „ Fire- and smoke-protection doors must be prepared with a cable chan-
nel or the like.
„ „ To guarantee functional security, the full projection of the latchbolt
must be ensured.
All deliveries are still made on the basis of our General Terms and Condi-
tions.
DE
44

Intended use

EN FR ES
08.2013 | G27856 | Printed in Germany