Watching Recorded Programmes; Changing Image Size: Picture Formats - Sharp LC-40LE530E Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

You can press
(RECORD) button on the remote control again to
record the next event on the EPG. In this case, OSD will display the
programmed events for recording.
Press
(STOP) button to cancel instant recording. The following OSD
will be displayed:
Select Yes by using " " or " " / OK buttons to cancel instant
recording.
Note: Switching to a different broadcast or source; and viewing Media
Browser are not available during the recording.

Watching Recorded Programmes

In the main menu, use " " or " " buttons to select Media Browser.
Highlight Recordings Library item by using " " or " " button and press
OK button to enter. Recordings Library will then be displayed.
IMPORTANT: To view recordings library, you should first connect a USB
disk to your TV while the TV is switched off. You should then switch
on the TV to enable recording feature. Otherwise, recording feature
will not be available.
Select a recorded item from the list (if previously recorded) by using
" " / " " button. Press OK button to view Play Options. Select an
option by using " " / " " or OK buttons.
Available playback options:
Play from start: Plays the recording from the beginning.
Resume: Recommences the recordings.
Play from offset: Specifies a playing point.
Note: Viewing main menu and menu items will not be available during
the playback.
Press
(STOP) button to stop a playback and return to return to
Recordings Library.
Slow Forward
If you press
(PAUSE) button while watching recorded programmes,
slow forward feature will be available. You can use
forward. Pressing
button consecutively will change slow forwarding
speed.

Changing Image Size: Picture Formats

You can change the aspect ratio (image size) of the TV for viewing
the picture in different zoom modes.
Press
"SCREEN" button repeatedly to change the image size.
Available zoom modes are listed below.
Auto
When AUTO is selected, the aspect ratio of the screen is adjusted by
the information provided by the selected source (if available).
The format being displayed in AUTO mode is completely independent
of WSS information which could be included in the broadcast signal
or the signal from an external device.
Note: Auto mode only will be available in HDMI, YPbPr and DTV
sources.
16:9
This uniformly stretches the left and right sides of a normal picture (4:3
aspect ratio) to fill the wide TV screen.
For 16:9 aspect ratio pictures that have been squeezed into a normal
picture (4:3 aspect ratio), use the 16:9 mode to restore the picture
to its original shape.
Subtitle
This zooms up the wide picture (16:9 aspect ratio) with subtitles to
the full screen.
Note: You can shift to screen up or down by pressing " " / " " buttons
while picture zoom is selected as panaromic, 14:9 Zoom, Cinema or
Subtitle.
14:9
This zooms up the wide picture (14:9 aspect ratio) to the upper and
lower limits of the screen.
14:9 Zoom
button to slow
This option zooms to the 14:9 picture.
4:3
Use to view a normal picture (4:3 aspect ratio) as this is its original
size.
English - 17 -

Publicité

Table des Matières
loading

Table des Matières