Technical Data - Zanussi ZFC21JE Notice D'utilisation

Problem
Customer Service
If your appliance is still not working properly after making
the above checks, contact the nearest service centre.
To obtain fast service, it is essential that when you apply
for it you specify the model and serial number of your
appliance which can be found either on the guarantee
certificate or on the rating plate located on the external
right side of the appliance.
Replacing the lamp
1. Disconnect the mains plug from the mains socket.
2. Replace the used lamp with a new lamp of the same
power (the maximum power is shown on the lamp
cover).

Technical data

Volume (gross)
Volume (net)
Height
Width
Depth
Weight
Rising Time
Energy Consump-
tion
Freezing Capacity
Rated Power
Voltage
Climatic Class
Further technical information are situated in the rating
plate on the external right side of the appliance.
40
Possible cause
Power does not reach the appliance.
The appliance is not switched on.
There is no voltage in the mains socket
(try to connect another appliance into
it).
Litre 213
Litre 210
mm 876
mm 795
mm 665
Kg 39
hours 28
kWh/24h 0,784
kg/24h 14
Watt 80
Volts 230
SN-T
Try connecting another electrical device
to the power outlet.
Switch on the appliance.
Call an electrician.
3. Connect the mains plug to the mains socket.
4. Open the lid. Make sure that the lamp comes on.
Warning! Do not remove the lamp cover at the time
of replacement.
Do not operate the freezer if the lamp cover is damaged
or missing.
ZFC21JE ZFC30JE
304
300
876
1050
665
49
32
0,959
17
85
230
SN-T
Solution
ZFC40JE
404
400
876
1325
665
56
31
1,153
19
105
230
SN-T