Velleman K6706 Mode D'emploi page 9

TWO CHANNEL CODELOCK
TRANSMITTER
Two K6707 receivers can be operated using just the one
transmitter.
Together with the codelock receivers, this kit can be used for the
remote controlled operation of many things eg.:
Garage doors, door lock, car alarm (e.g. K3504) perhaps
together with the central locking system, the remote controlled
operation of lighting - both indoors and outdoors, etc.
The code can be selected from more than 8,000 combinations,
providing no chance for any unwanted visitors. One single
receiver may be used in conjunction with several transmitters or
vice-versa.
TECHNICAL DATA
• Easy to construct: no coils to be wound.
• 2 channels.
• Works together with K6707 codelock receiver.
• 8748 possible codes.
• Transmitter/receiver range 30m approx.
• On/off LED and battery indication.
• Key fob housing.
• Supply: 12V battery type V23GA, GP23A, 23, 23M, VR22.
• Dimensions WxHxD (35 x 15 x 57mm).
Wijzigingen voorbehouden
CONSTRUCTION
IMPORTANT
• MOUNT ALL COMPONENTS AGAINST THE P.C.B.
• USE A SMALL SOLDERING IRON OF MAX. 40W
• USE THIN (1mm) SOLDERING TINDO NOT USE
SOLDERING GREASE!
9