Setting Tty Mode - ZTE MF288 Additif Au Guide D'utilisation

ZTE MF288 User Guide
Forward when unanswered
1. Press *61* on your connected phone.
2. Dial the 10-digit number to which you wish to forward your calls.
3. Press "#" key.
(Example: *61*1234567890**10# forwards your calls to the phone number 123-456-7890,
if you don't answer the calls for 10 seconds.)
4. Wait for 3 seconds until you hear a confirmation tone for the forwarding process to
complete before hanging up.
NOTE:
Press #61# to un-forward calls.
Forward when unreachable
1. Press *62* on your connected phone.
2. Dial the 10-digit number to which you wish to forward your calls.
3. Press "#" key.
4. Wait for 3 seconds until you hear a confirmation tone for the forwarding process to
complete before hanging up.
NOTE:
Press #62# to un-forward calls.

Setting TTY mode

Your MF288 is a TTY compatible device. A TTY device can allow people who have
hearing or speech disabilities to communicate by telephone. Select a TTY mode for your
MF288 to work with a TTY device, or turn TTY off.
Dial *983*889*N# on your connected phone to set TTY mode.
N=0(TTY off): Users who can hear and talk can disable TTY support.
N=1(TTY Full mode): Users who cannot talk or hear may use this mode to send and
receive text messages through a TTY device.
N=2(VCO mode): Users who can talk, but cannot hear, may use this mode to talk
through the phone and receive responses via text messages.
N=3(HCO mode): Users who can hear, but cannot talk, may use this mode to listen to
conversation of the other party and respond via text messages.
Confidential and Proprietary Information of ZTE CORPORATION 9