CAPITAL SPORTS Azura M1 Mode D'emploi page 35

Step 4: Install the Left and Right Pedal
• Note: Left Pedal installs counter clockwise. Install by rotating to LEFT.
Use care that Pedal Shaft is Perpendicular to Crank Shaft. Use sup-
plied wrench to tighten. Check pedals often for tightness when new.
• Note: Crank arms should be checked for tight- ness using 14mm socket
after first couple hours of use.
Step 5: Install the Saddle, Seat Back Cushion and the Back Handlebar
• Saddle (78) is mounted to Seat adjust- ing Metal (3) using Nylon nut M8
(40) and Washer (31).
• Align Bolt (28) with hole of Rear Handlebar Set (76), through Washer
(24) and tighten securely.
• Align Bolt (19) with the hole of assembled seat back cushion(79),
through Washer
• (24) and Nylon Nut (40) and tighten securely.
• Back rest is connected with the seat tightly through Nylon Nut
(40),Washer (31) and Bolt (17).
EN
35