Symbol Information - Riester ri-champion smartPRO Mode D'emploi

3. If the result is higher/lower than user's average measurement:
POSSIBLE CAUSE
May not be in correct position while
measuring.
Blood pressure naturally varies from
time to time.
4. If the cuff inflates again while measuring:
POSSIBLE CAUSE
Cuff is not fastened.
If user's blood pressure is higher than the pressure the device has inflated, the
device will automatically increase the pressure and start to inflate again. Stay
relaxed and wait for the measurement.

SYMBOL INFORMATION

Symbol
Manufacturer
Serial number
Temperature limit
CE mark
0123
Caution
Authorized representative in
the European Community
Refer to instruction manual
/ booklet NOTE On ME
EQUIPMENT "Follow
instructions for use"
Referent
WHAT TO DO
Adjust to the correct position to
measure.
Keep in mind for next measurement.
WHAT TO DO
Fasten the cuff again.
Symbol
Type BF applied part
Resistant to liquid ingress
Humidity limitation
RoHS Compliance
This device does not belong to
household waste and must be
returned to a collection point for
recycling electric and electronic
devices according to local
laws. If it contains batteries, the
batteries should be removed
and disposed in accordance with
local regulations for separate
collection of spent batteries.
20
Referent