Using Your Cooler/Freezer - Beko BTS 114200 Mode D'emploi

5

Using your cooler/freezer

1
1- On/Off function
Press the On/Off button for 3 seconds
to turn off or turn on the fridge.
2- Fridge Set Function
This function allows you to make
the fridge compartment temperature
setting.
Press this button
temperature of the fridge compartment
to - (warmest), --, ---, ----, ----- (coldest)
respectively.
3- Fridge Compartment
Temperature Setting Indicator
Indicates the temperature set for the
Fridge Compartment. Settings are
(warmest), --, ---, ----, ----- (coldest)
4- High Temperature Error /
Warning Indicator
This light comes on during high
temperature failures and error warnings.
5- Quick Fridge Indicator
This icon lits when the Quick Fridge
function is active.
6-Quick Fridge Function
When you press Quick Fridge button,
the temperature of the compartment
will be colder than the adjusted values.
This function can be used for food
placed in the fridge compartment and
required to be cooled down rapidly.
3
2
to set the
-
14
4
If you want to cool large amounts of
fresh food, it is recommended to active
this feature before putting the food
into the fridge. Quick Fridge indicator
will remain lit when the Quick Fridge
function is enabled. To cancel this
function press Quick Fridge button
again. Quick Fridge indicator will turn
off and return to its normal settings.
If you do not cancel it, Quick Fridge
will cancel itself automatically after 2
hours or when the fridge compartment
reaches to the required temperature.
This function is not recalled when
power restores after a power failure.
7- Alarm Off
When the fridge door is opened for 2
minutes or when there a sensor failure,
a sound alarm turns on. Alarm can
be turned off by pressing "Alarm Off"
button.
Sensor failure alarm will not sound till
power failure. If you close the door and
then open again "Door open alarm" will
be activated again after 2 minutes later.
EN
6
5
7