Samsung WF45T6000A Série Manuel D'utilisation page 18

Installation
Drain
Samsung recommends a standpipe 18 in. (460 mm) high. The drain hose must be
connected through the hose clip to the standpipe, and the standpipe must fully cover the
drain hose.
Flooring
For best performance, the washer must be installed on a solid floor. Wood floors may
need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft
tile surfaces do not provide good resistance to vibrations and may cause the washer to
move slightly during the spin cycle.
CAUTION
Do NOT install the washer on a platform or a poorly supported structure.
Water temperature
Do not install the washer in areas where water may freeze as the washer always retains
some water in its water valves, pumps, and/or hoses. Frozen water can cause damage to
belts, the pump, and other components of the washer.
Dimensions
A. Overall height
B. Width
C. Depth with door open
D. Depth
18 English
Untitled-7 18 Untitled-7 18
38.7 in. (984 mm)
27 in. (686 mm)
52.6 in. (1337 mm)
31.3 in (796 mm)
4/2/2020 2:57:54 PM 4/2/2020 2:57:54 PM