Dexter power CGA18LD Manuel D'utilisation page 10

EN
TECHNICAL DATA
Type CGA18LD (CGA -designation of machinery, representative of Angle Grinder)
Voltage
Charger Model
Battery pack model
No. Of battery cells
Battery capacity
Charging time
Rated speed
Disc size
Disc bore
Thickness of recommend grinding wheel
Grinding Disc type
Grinding disc guard type
Spindle thread
Machine weight
NOISE INFORMATION
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection when sound pressure is over
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Grinder
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being grinded.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
Note:
- that the declared vibration total value has been measured in accordance with a standard test method
and may be used for comparing one tool with another;
- that the declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
- that the vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used
10
surface grinding
Vibration emission value a
Uncertainty K = 1.5m/s²
18V
ACG18LD
ABP118L2 / ABP118L3
5 / 10
2.0Ah Li-Ion / 3.0Ah Li-Ion
80min / 2h
8800/min
115mm
22.23mm
6mm
Type 27
For grinding disc type 27
M14
1.56kg
L 77dB(A)
pA
3dB(A)
L 88dB(A)
wA
3dB(A)
80dB(A)
= 4.381m/s
2
h,AG