Wella Professionals Contura HS60 Mode D'emploi page 26

Contura.book Seite 26 Freitag, 6. Januar 2012 1:01 13
• The blade head must not be dismantled.
NOTE:
• The safety of Wella electrical appliances is in line
with the recognised state of the art and the Ger-
man Equipment Safety Act.
• Light-emitting devices such as LEDs or infrared
light do not exceed Laser class 1 of IEC 825-1.
• Given the present state of the art, components of
electrical appliances are subject to a certain
degree of wear over time. To ensure perfect func-
tioning and safety, we therefore recommend reg-
ular inspection by Wella's Technical Customer
Service.
Safety during operation
CAUTION:
• When the appliance is switched on, do
not touch the inside or surface of the
blade.
26
• The appliance must be switched off whenever:
– you put it down, e.g. to recharge it or stop cut-
ting hair for a short period.
– you fit or remove the comb attachment.
• Use the Contura only in combination with the
original Wella accessories (charging unit, comb
attachment etc.).
NOTE:
• To maintain the charging capacity of the
rechargeable battery we recommend occasionally
running the battery down until the motor stops.
Cleaning, care and storage
DANGER:
• The appliance must be switched off
and unplugged if:
– you want to clean or oil the appliance.
• Never attempt to remove dust or foreign bodies
from inside the appliance with pointed objects
(e.g. with the tail of a comb).