Philips HD2626 Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
4222 001 97763
24-03-2006
8
ENGLISH
Before every new warming cycle, you have to push the toasting lever down and press the warming
button again.
Cleaning
1
Unplug the appliance.
2
Let the appliance cool down.
3
Clean the appliance with a damp cloth. Do not use abrasive cleaning agents.
Never immerse the appliance in water.
4
Remove crumbs from the appliance by sliding the crumb tray out of the appliance (fig. 12).
Do not hold the appliance upside down and do not shake it to remove the crumbs.
Environment
Do not throw the appliance away with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this you will help to preserve
the environment (fig. 13).
Guarantee & service
If you need information or if you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you will find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your
local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal
Care BV.
Troubleshooting
If you are unable to solve the problem by means of this troubleshooting guide, contact the
Customer Care Centre in your country (see chapter 'Guarantee & service').
Problem
1.The toaster does not
work.
2. Bread gets stuck in the
appliance.
3.The toast is too
dark/too light.
4. Smoke comes out of
the toaster.
5.The mains cord is
damaged.
6. I cannot change the
browning level when I
use the warming
function.
7. Only one side of my roll
or croissant is warm.
10:18
Pagina 8
Solution
Check if the plug has been properly inserted into the wall socket.
If the toaster still does not work, take it to a service centre authorised by Philips
for examination.
Unplug the appliance and let it cool down. Carefully remove the slice or slices
from the toaster.Take care not to damage the heating elements while removing
the slice or slices of bread. Never use a metal object for this purpose.
Check the browning setting selected for toasting. Select a lower setting next time if
your toast is too dark and a higher setting if your toast is too light.
You have chosen a too high setting for the type of bread inserted. Push the stop
button to stop the toasting process.
If the mains cord of this appliance is damaged, it must always be replaced by
Philips, a service centre authorised by Philips or similarly qualified persons in order
to avoid a hazard.
This is normal, for the toaster has a fixed temperature setting for warming up rolls
and croissants, which guarantees a perfect end result.
Turn your roll or croissant over and warm it up again. Follow the instructions in
'Heating up rolls or croissants'.

Publicité

Table des Matières
loading

Table des Matières