Yoo Digital Home VAPYOO 900 Mode D'emploi page 17

t Ro U B L E S H o ot I N g __________________________
Problems
Iron won't heat
Water tank decoration
indicator light blinks.
5 BEEP sounds alarm
when press down the
steam button.
Droplets of water es-
cape from the soleplate
Water tank decoration
indicator light off
All indicator light off
Iron does not produce
steam
__________________________________________________________
Possible causes
Incorrect connection to the
main socket.
temperature setting button is
set at o position.
Power off
Handle has not been laid down.
Unknown malfunction.
No water or not enough water in
water tank.
temperature setting button is set
at low temperature position.
the set temperature has not been
reached or is too low.
Steam is set at higher position.
Water tank has not been installed
in place.
filter is missed to install.
Un-known malfunctions.
the appliance comes into auto-
shut off mode.
the set temperature has not been
reached.
Steam button is not set at steam
ironing position.
Solution
Re-plug the unit to main socket.
Set to the required position.
Switch the appliance oN.
Lay handle down.
take it to qualified service man or
manufacturer for repair.
fill water to water tank as descri-
bed in "fill water tank".
Set temperature setting button
to suitable position refer to fabric
setting chart.
Allow sufficient time for iron to
preheat or set higher temperature.
Set to lower steam setting.
Well install the water tank.
Install the filter.
take it to qualified service man or
manufacturer for repair.
Press power oN/off to reset it.
Allow sufficient time to preheat
until heating indicator light turn
off.
Ensure the steam button is set at
steam ironing position and steam
indicator light is oN.
USER'S MANUAL I.WIP 1200 15
EN