Anti-Calc System; Safety Protection Device; Auto Shut Off Function - Yoo Digital Home VAPYOO 900 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. After power on, press steam selection switch and Power oN/off concurrently (fig.12), filter
replacement indicator light will stop blinking and come into checking program again.
A N t I - CA L C S YS t E M _______________________
1. the filter is designed to reduce the build-up of limescale which occurs during steam ironing, this
will prolong the working life of your iron. However, please note that the filter will not completely
stop the natural process of limescales build-up.
2. After the filter is invalid, even if a new one is not available at that time. the filter can still be
used continuously. However, limescales may be most probably built up in steam chamber, this
happens always depending on your local water quality. It is proposed that replace filter as soon
as possible or mix your water with 50% proportion of distilled water.
S A f E t Y P Rot E C t I o N D E V I C E ________________
this appliance has a safety protection device in the base unit. If the supply hose is blocked acci-
dentally, the safety valve will be opened to release steam from the safety vents under the base
unit along with high pitch sounds. once this happen, unplug the appliance immediately, and check
whether any damage is found in the supply hose.
AU to S H U t o f f f U N C t I o N ____________________
the iron will auto shut off after 20minutes if the steam button is not pressed (fig 13).
All indicator lights off. Press Power oN/off to turn the iron back oN for resuming.
Note
Auto shut off function will not be activated if the steam button lock is locked for a
long term. Release the steam button lock it can resume.
__________________________________________________________
USER'S MANUAL I.WIP 1200 13
EN

Publicité

Chapitres

Table des Matières
loading

Table des Matières