Hama Spirit Chop Mode D'emploi page 7

6. Bluetooth pairing
®
Note - Pairing
• Make sure that your Bluetooth
• For more information, please refer to the operating instructions of your device�
The earphones and the device should not be more than 1 metre apart� The shorter the distance, the
better�
Ensure that the earphones are switched on�
Check the status of the status LED (3)
1
If the status LED (3) on the left earphone flashes alternately:
the earphones are searching for a Bluetooth
If the status LEDs (3) are flashing and then go out:
the earphones are already paired with a Bluetooth
-capable device is switched on and that Bluetooth
®
is activated�
®
connection�
®
device�
®
7