Publicité
Les langues disponibles
Les langues disponibles
Dear Customer,
Before using the appliance, the user must
read the following instructions carefully.
Connection to the mains supply
Th e appliance should only be connected to
an earthed socket installed in accordance
with the regulations. Make sure that the
supply voltage corresponds with the voltage
marked on the rating label of the appliance.
Th is product complies with all binding CE
labelling directives.
Familiarisation
1.
Base
2.
Milk container
3.
Lid
4.
Handle
5.
Main indicator lamp
6.
On/Off switch
7.
Stirring head - smooth (for heating
milk)
8.
Stirring head - serrated (for frothing
milk)
9.
Power cord storage (on underside of
appliance)
10. Power cord with plug
Important safety instructions
Before the appliance is used, the main
body as well as any attachments fi tted
should be checked thoroughly for any
defects. If the appliance, for instance, has
been dropped onto a hard surface, it must
no longer be used: even invisible damage
may have adverse eff ects on its operational
safety.
Th e power cord should be regularly
examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.
Do not operate the appliance if excessive
force has been used to pull the power
cord. Damage cannot always be detected
Milk frother
from the outside; the entire unit should
therefore be checked by a qualifi ed
technician before it is used again.
Th is appliance is not intended for use by
any persons (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning
the use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Caution: Keep any packaging materials
well away from children: there is a risk of
suff ocation.
Th is appliance is designed for heating
up and frothing milk. Do not put any
other type of liquid or solid food in the
container.
Do not leave the milk frother unattended
while in use.
Always observe the minimum and
maximum level marks inside the container
for each application.
Th e protrusion in the bottom of the
container (min. level mark) must be
covered by the milk. If there is not enough
milk, the appliance may overheat.
To
prevent
appliance will automatically switch off if it
is operated when empty.
Overfi lling the container may cause
danger if frothing milk is forced out.
Caution: the lid must be fi tted during
operation.
Caution: Th e milk container heats up
during operation. Do not touch hot
surfaces.
Hold the container only by its handle.
Th e appliance may only be used with the
original accessory parts provided by the
manufacturer.
Th e appliance must always be set on a fi rm,
level surface.
Do not allow the appliance or its power
cord to come into contact with open
fl ames or any hot surfaces such as hot-
8
such
overheating,
the
Publicité
