Commissioning And Settings - Storch HPM contact Mode D'emploi

Overview of the LCD display
1. Battery status
2. Temperature compensation (select in the Manual tempera-
ture selection menu item)
3. Selected characteristic (select or change using the Material
key)
4. Measurement result in weight in %, CM%, and relative %
display
5. Status message on the measurement result
6. Graphical illustration of the moisture contents (intended as
support for the status message)
3
6

Commissioning and settings

Switching the device on and off
button. Switches the device on and off. The button is
also intended as the button to confirm your selection when
you are in a menu.
Caution:
Please note the measuring device's CM values cannot replace
traditional CM measurement methods.
2
55
1
4
5