Etherma LAVA FRAME Instructions D'installation Et D'utilisation page 11

O V E R V I E W O F T Y P E S A N D V E R S I O N S
LAVA FRAME
®
The LAVA ® FRAME is an infrared heating device with a high in-
tensity of radiation for wall or ceiling installation. The device
is characterised by its homogeneous temperature distribution
and its fast heating response. Due to the internal insulation, it
heats the room with a maximum radiation intensity. As a stand-
ard, the LAVA ® FRAME infrared heating device comes with only
one connecting cable.
S C O P E O F D E L I V E R Y | P A C K A G I N G
The LAVA ® FRAME infrared heating device must be mounted
exclusively using the fixing components included in the scope
of delivery.
Screws and dowels (not included in the scope of delivery) must
correspond to the construction material of the wall or ceiling
(masonry, concrete, plasterboard, etc.). The surface of the ceil-
ing or wall must be even.
STANDARD SCOPE OF DELIVERY LAVA
› 1 LAVA ® FRAME Infrared heating unit
› Mounting frame, 1 unit
®
FRAME:
CONTROL SYSTEM
Radio-controlled thermostats avoid complex demolition and
plaster work for cable routing and allow easy installation of
heaters.
ET-111A - Radio receiver: The radio receiver is fixed to the rear
side of the LAVA ® FRAME. In connection with an ET-14A, the
ET-111A radio receiver provides for easy switching of up to ten
LAVA ® infrared heaters.
The ET-14A is a radio-controlled room temperature regulator
with a freely programmable weekly programme, frost protec-
tion, manual operation and on/off function.
Wired room thermostats:
Ideal for new buildings and renovation.
11