Intended.use; Basic.safety.instructions - Magura MT7 Mode D'emploi

i
ntenDeD use
Any use other than the intended use can lead to accidents that cause
serious or fatal injury.
MAGURA MT disc brakes are designed and intended exclusively
for installation on conventional touring and trekking bikes,
–
S-/Pedelecs* and mountain bikes with forks and frames that
possess suitable mounting fixtures (IS 2000, PostMount or Flat-
mount mounting base.) - with max. 1 MAGURA QM adapter per
brake calliper.
(* taking account of relevant statutory regulations
for installation on conventional – straight – touring, trekking and
–
mountain bike handlebars.
for use with wheels with hubs that have the corresponding
–
mounts for the disc brake rotor (6-hole (IS), Centerlock™ (if
required with MAGURA Centerlock adapter), BionX
for the specified application
–
– see , page 21, – see
s
pecifications
MAGURA disc brakes must never be combined and used with com-
ponents (brake lever blade, brake body, etc.) of MAGURA rim brakes!
The restriction of the allowable total weight of MAGURA MT disc
brakes is subject exclusively to the selected diameter of the disc
brake rotors or the combination on the front and rear wheel – see
, page 21.
D
isc Brake rotors
Disc brake rotors with Ø 140 mm must only be used with
wheels with max. 20" (ETRTO 406) (e.g. kid's bike, BMX, scooter,
trailer)!
Disc brake rotors must never be used for S-Pedelec,
Pedelec, Cargo bike and Tandem!
22
safety
.)
, Rohloff ).
® ®
, page 21.
D
isc Brake rotors
B
asic safety instructions
Always remember that riding a bicycle entails risk both for the rider
and other road users, and for the bicycle and its components. Despite
the use of safety gear and complete safety equipment, accidents that
cause serious or fatal injury can occur.
Always use your common sense and avoid any unreasonable actions!
Installation & Maintenance
Danger of accident due to a failing brake caused by incorrect or imper-
missible installation work.
Never overestimate your technical capabilities. Commission a

specialist workshop for bicycles or an authorized MAGURA
service centre with all installation and maintenance work. This is
the only way to ensure that work is conducted in a professional
manner.
Never carry out any work or make any changes (e. g. disassembly,

grinding/painting etc.) to your MAGURA product that are not
specifically permitted and described in the owner's manual.
Always observe all min./max. values stated – see

, page 21.
cations
For assembly steps that require a specific tightening torque for a

screw union, always use a torque wrench set up for the required
torque.
Always maintain your bicycle in technically perfect working order.

Danger of accident due to improper accessories.
Use only MAGURA original parts.

Use only original MAGURA disc brake rotors, brake pads, adapters

and screws and also use MAGURA Royal Blood (mineral oil) to
bleed and fill the MAGURA.
Never use DOT brake fluid.

t s -
echnical pecifi