Publicité
PowerXL DM1 option cards
instruction leaflet
Mounting—Montaje—Montage—Montaggio—Montering—
Montáž—Paigaldamine—Felszerelése—Mont ža—Montavimas—Monta —Montaža—
Montarea—
—
Step 3.
1. Connect the cable to option card connector ③ and MCU
board connector ④.
3
Step 4.
1. Clamp the cable with optional card port.
2. Mount the option card to the drive by inserting the four
snaps into the slots on drive.
4
—Montagem—Asennus—
Step 5.
For enclosed type:
1. Install the terminal cover ② to the drive.
2. Install the front cover ① to the NEMA 1 kit.
For open type:
1. Only install the terminal cover ② to the drive.
Instruction Leaflet
PUB53683
Effective March 2020
—
2
1
EATON www.eaton.com
3
Publicité
