Dimensional Drawings - Camille Bauer Inax N702-Inox Hart Mode D'emploi

5.8 Dimensional drawings

72
[2.834]
62
[2.44]
Cable gland
M12x1,5
11
[0.433]
6. Mounting
All inclination transmitter can be mounted either directly
with 3 clamping brackets to the item being measured or with a mounting
plate with 4 cheese head screws M6. Please take care that the installation
position of the inclination transmitter is perpendicular to the gravity of the
earth. The inclination transmitter are supplied standard with mounting plate
but without cheese head screws M6.
Mounting versions
Tk-Ø85 (4x90°)
[3.346]
80
[3.15]
C C
C-C
Ø6,4
[0.252]
Ø11
[0.433]
• Avoid impacts or shocks on the housing.
• Do not deform housing.
• Do not open or mechanically modify the device.
Drilling aund cut-out diagrams (for mounting transmitters)
Ø66,2 Ø66,2
[2.606]
60,1
60,1
2.366
M6
M6
13