Safety Instructions; Scope Of Delivery - Camille Bauer Inax N702-Inox Hart Mode D'emploi

Operating Instructions
KINAX N702-INOX, absolute inclination transmitter

1. Safety instructions

1.1 Symbols
The symbols in these instructions point out risks and have the following
meaning:
Warning in case of risks.
Non-observance can result in malfunctioning.
Non-observance can result in malfunctioning and
personal injury.
Information on proper product handling.
1.2 Intended use
• The KINAX N702-INOX HART inclination transmitter is a precision instrument.
It serves the acquisition of inclination and angular position, processing
and the provision of measured values as electric output signals for the
downstream device. Use the transmitter for this purpose only.
• The device is intended for installation in industrial plants and meets the
requirements of EN 61 010-1.
• Manufacturer is not liable for any damage caused by inappropriate handling,
modification or any application not according to the intended purpose.
• Local accident prevention regulations and general safety provisions shall
be observed.
1.3 Commissioning
• Installation, assembly, setup and commissioning of
the device has to be carried out exclusively by skilled
workers.
• Observe manufacturer's operating instructions.
• Check all electric connections prior to commissioning
the plant.
• If assembly, electric connection or other work on the
device and the plant are not carried out properly,
this may result in malfunctioning or breakdown of
the device.
• Safety measures should be taken to avoid any danger
to persons, any damage of the plant and any damage
of the equipment due to breakdown or malfunctioning
of the device.
• Do not operate the device outside of the limit
values stated in the operating instructions.
1.4 Repair work and modifications
Repair work and modifications shall exclusively be car-
ried out by the manufacturer. Do not open the housing
of the device. In case of any tampering with the device,
the guaranty claim shall lapse. We reserve the right of
changing the product to improve it.
1.5 Disposal
The disposal of devices and components may only be
realised in accordance with good professional practice
observing the country-specific regulations.
Incorrect disposal can cause environmental risks.
1.6 Transport and storage
Transport and store the devices exclusively in their
original packaging. Do not drop devices or expose
them to substantial shocks.
1.7 Return
All devices delivered to Camille Bauer
Metrawatt AG shall be free of any hazardous conta-
minants (acids, lyes, solutions, etc.).
Use original packaging or suitable transport packaging
to return the device.
1.8 Disclaimer of liability
The content of this document has been reviewed to ensure correctness.
Nevertheless it may contain errors or inconsistencies and we cannot gua-
rantee completeness and correctness. This is especially true for different
language versions of this document. This document is regularly reviewed
and updated. Necessary corrections will be included in subsequent version
and are available via our webpage http://www.camillebauer.com.
1.9 Feedback
If you detect errors in this document or if there is necessary information
missing, please inform us via e-mail to:
customer-support@camillebauer.com

2. Scope of delivery

1 Inclination transmitter KINAX N702-INOX HART
1 Mounting plate with 3 clamps
1 Operating instructions German, English, French, Italian
11