UWELL NUNCHAKU Mode D'emploi page 69

67
UWELL Nunchaku – Using the Device
Changing the glass tank
1. Remove the atomizer base from the glass tank.
2. Fix the top cap and unscrew the glass tank clockwise. He can now be removed for the change.
3. After changing or cleaning reconnect all parts again.
Adjusting the Air Supply
There is a airow control ring located on the head base of the device. It can be adjusted by slightly
turning and is adaptable to your vapor preferences. The more air ows through the device (the more
the slots are open), the lower is the drawing resistance. Pay particular attention to a sufficient air supply
during sub-ohm vaping.
Changing the Mouthpiece
The mouthpiece is placed on the Clearomizer. It can be removed by gentle pulling. The mouthpiece
can be cleaned with warm water. Make sure it is completely dry before attaching.