UWELL NUNCHAKU Mode D'emploi page 68

UWELL Nunchaku – Using the Device
Changing the Atomizer Head
1. Disconnect the clearomizer from the battery of your e-cigarette.
2. Turn it so that the mouthpiece points to the oor. Remove the atomizer head base with Airow
Control by turning counterclockwise from the glass tank of the unit.
3. Remove the old atomizer head by pulling it out and replace it by a new one. The red o-rings must still
be properly seated to prevent leakage of e-liquid.
4. Finally, reconnect all parts and make sure no liquid can escape. Screw the clearomizer back to the
battery and give the new vaporizer head plenty of time to absorb liquid.
Please note the Following:
Prior to first use, drip a few drops of your e-liquid on the atomizer head and let it sit before vaping.
Please take several puffs without activating the atomizer and leave the atomizer head sit for 15
minutes in the e-liquid filled tank before use. Don't clean atomizer heads with water. Because
atomizer coils are wearing parts, they must be changed regularly.
66