Vortice VORT PROMETEO PLUS HR 400 Notice D'emploi Et D'entretien page 17

ENGLISH
CO 2 concentration setting (ppm) (fig.4d):
4d 4d
CO2(ppm)
• to view the parameter, press: SET and NEXT
(several times);
• set the value of the flashing field with the + and -
keys (from 500 ppm to 3000 ppm, in steps of 50
ppm, or OFF: no CO 2 monitoring).
Speed V min setting (fig.4e):
4e 4e
• to view the parameter, press: SET and NEXT
(several times);
• set the value of the flashing field with the + and -
keys (from 0 to 69, in steps of 1).
Speed V max setting (fig.4f):
4f 4f
• to view the parameter, press: SET and NEXT
(several times);
• set the value of the flashing field with the + and -
keys (from Vmin+10 to 99, in steps of 1).
DISPLAY button (fig.5)
5 5
DISPLAY
SET
During normal operation, the following information
will appear on the remote control display when the
appliance is switched on:
the time;
the day of the week;
the operating mode: (AUTO, MAN, BP);
the operating speed: (Min, Max, Mid (the latter in
MAN mode only)).
Press and hold the DISPLAY key for half a second
repeatedly to view the following system parameters in
sequence:
AUTO
Su
TIMER MODE
NEXT ENTER
17