Options; Rfid; Key Switch - ABB EVLunic Pro M W22-G6-R-CM Manuel D'utilisation

3.4

Options

This chapter lists the possible options of the charging station.
3.4.1

RFID

The RFID reader is used for the non-contact authorization of a loading process with MIFARE
cards or tags according to ISO 14443 and ISO 15693.
Fig. 3: RFID
[1] RFID reader
3.4.2

Key switch

The key switch is used for authorizing a charging process with a key.
Fig. 4: Key switch
[1] Key switch
For information about replacing the cylinder lock, see Fehler! Verweisquelle konnte nicht g
efunden werden. Changing the cylinder lock.
Operating instructions V 1.00 Document: V 1.00 / Document No.: 105728 │ Date 28.05.2018
Description of the charging station
│10