Description And Operation; Safety - Vortice VORTDRY 1000 Série Notice D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
813 - Vort Dry 1000:Layout 1
ENGLISH

Description and operation

This appliance you have purchased is a hairdryer
fitted with a flexible hose and nozzle. It has been
designed for wall-mounting and is suitable for use in
private homes or in public places such as swimming
pools, hotels etc. The appliance has an IPX4
protection rating.
The Vortdry 1000 family encompasses the following
models:
VORTDRY 1000 (fig.10)
VORTDRY 1000 PLUS (fig. 11): This version has two
shaver sockets (230V and 115V).

Safety

Warning:
!
this symbol indicates that care must
be taken to avoid injury to the user
• Do not use this appliance for functions other than
those described in this booklet.
• After removing the appliance from its packaging,
ensure that it is complete and undamaged. If in
doubt contact a Vortice service centre. Do not leave
packaging within the reach of children or differently
able persons.
• Certain fundamental rules must be observed when
using any electrical appliance:
- never touch appliances with wet or damp hands;
- never touch appliances while barefoot;
- do not allow the unit to be operated by
unsupervised children or disabled persons.
• This appliance is not suitable for use by children or
by individuals with reduced physical, sensorial or
mental capacities or by inexperienced or untrained
individuals, unless they are supervised or instructed
in its use by a person responsible for their safety.
Children must always be supervised to ensure that
they do not play with the appliance.
• Store the appliance out of the reach of children and
disabled persons if you decide to disconnect it from
the power supply and use it no more.
• Do not us the appliance where there are
inflammable substances and vapours (alcohol,
insecticides, petrol, etc.).
• Hold the hair dryer at a safe distance from your hair
while drying it.
Caution:
!
this symbol indicates that care must
be taken to avoid damaging the appliance
• Do not make modifications of any kind to this
appliance.
• Do not expose the appliance to the elements (rain,
sun, etc.).
• Do not leave objects standing on the appliance.
• Do not obstruct the air nozzle.
• Do not fit any accessories to the air nozzle other
07/02/2011
16.30
Pagina 8
than those supplied.
• Always replace the appliance on its wall mount after
use.
• Never put anything into the air intakes and outlets.
• Regularly inspect the appliance for visible defects. If
any are found, do not operate the appliance;
contact your Vortice Service Centre immediately.
• If the appliance does not function correctly or
develops a fault, contact your Vortice Service
Centre immediately and insist that only original
Vortice spares are used for repairs.
• Should the appliance be dropped or suffer a heavy
blow, have it checked immediately by your Vortice
Service Centre
• The appliance must be installed by a professionally
qualified technician.
• The mains power supply to which the units are
connected must comply with current laws.
• The electrical power supply/socket to which the
appliance is to be connected must be able to
provide the maximum electrical power required by
the appliance. If it cannot do so, arrange for a
qualified electrician to make the necessary
modifications.
• Switch the dryer off at the main switch: a) if the
appliance does not function correctly; b) before
cleaning the outside of the appliance; c) if you
intend not to use for a long period of time.
• If the appliance gets too hot, a special cutout trips
to protect the heating element. This device resets
automatically. If this safety device trips, you must
wait for the appliance to cool down again before
you can restart it (about 10 minutes). This temporary
interruption of hot air delivery is not the result of a
fault, and represents improved safety for the user.
• If power loads in excess of 20 W are connected to
the power sockets, an automatic safety device cuts
off the power supply. You must wait for power to be
restored before you can start using the power
sockets again
• The device's electrical hookup, associated activities
and mains hookup equipment must comply with
national installation standards.
(Nero/Black pellicola)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vortdry 1000Vortdry 1000 plus

Table des Matières