Télécharger Imprimer la page

BaByliss PRO 4rtists BAB2395E Mode D'emploi page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
HAIR TYPE
DESCRIPTION
very fine, fragile
hair
regularly
coloured or
highlighted
hair
fine, easy to
curl hair
normal
textured hair
naturally curly
or wavy hair
thick or coarse
hair
IMPORTANT! This styler is designed
to reach high temperatures. If the
maximum temperature is too hot
for the hair type then select a lower
temperature setting.
INSTRUCTIONS FOR USE
CAUTION! Do not place the app-
liance directly onto any heat sensi-
tive surface whilst in operation. Use
the heat wrap provided to protect
the work surface whilst styling the
hair.
Operating Instructions
• Press the 'I/0' button to switch the
styler on.
• The digital display will flash 3
times and automatically start
heating up to 180°C, where it will
RECOMMENDED
TEMPERATURE
SETTING
140-150 °C
160 °C
170 °C
180-190 °C
200 °C
210-230 °C
remain once it's reached this tem-
perature.
• Use the temperature buttons (+/-)
to select the preferred tempera-
ture.
The temperature increases in 10°C
increments for specific temperatu-
re control (140°C-230°C). IMPOR-
TANT! Always start with a lower
temperature and increase gradual-
ly if required.
• The display will flash 3 times to
confirm the temperature has
been selected.
• After use, press and hold the 'I/0'
button to switch your styler off
and unplug.
• Allow to cool completely before
storing away. For extra protection,
wrap the styler in the salon heat
wrap.
Temperature Memory Function
The memory feature allows you to
select your preferred temperature
setting and store it for consistent
results during each use.
• To program your preferred tem-
perature, ensure the appliance is
switched on. Select the tempe-
rature you require by using the
temperature buttons (+/-) and by
viewing the digital display.
• Hold down the memory button
(M) for 3 seconds. The temperatu-
re on the digital display will flash 3
times to confirm the temperature
has been stored and the memory
light ' ' symbol on the LED will
illuminate.
• The memory function will store
the selected temperature setting
7

Publicité

loading