Appropriate Use - flamco Flamcomat M-K Mode D'emploi

The present document is a supplement to the Installation and Operating instructions:
Flamcomat, Doc.no.: MC00448/06-2013/eng; Flexcon M-K, Doc. no.: MC00449/06-2013/eng and must be used with these basic documents only.
The general safety instructions contained therein apply in particular, as does the information on equipment, use and function.
For installation instructions and further documentation in various languages, visit www.flamcogroup.com/manuals.
Further product information can be obtained from the respective Flamco branch office (see page 2).

1. Appropriate use.

Electronic function assembly, expansion for an SPCx-lw / hw control unit for the activation of the 0-10V analogue signal for
the available vessel capacity and actual pressure input signals to the external pressure unit with pump (Flamcomat) or compressor (M-K).
The declaration of conformity in the basic document is applicable. The usual use is to show and analyse this data in remote control centres for
process logging, process evaluation and defining an error-management system. Signal processing units may include: programmable, two-channel
display/evaluation unit with limit definition, tendency evaluation, relay switch points, digital or analogue display; data logger...
4