Maintenance And Cleaning; Troubleshooting - newchef GO2000 Mode D'emploi

7. MAINTENANCE/CLEANING
Risk of burns!
Wait until the heating zone (2) is completely cool before cleaning it. Otherwise you could
get burnt.
Risk of electric shock!
• Always remove the power plug from the mains socket before cleaning. Failure to do so
could cause an electric shock.
• Do not poor or spray liquids onto the induction hotplate or through the ventilation slots.
This could cause short circuits which could cause electric shocks or burns.
Warning about property damage
Do not use abrasive or astringent detergents or tools which could scratch the surface.
These could damage the heating zone
• In order to avoid burning food residues, clean the induction hotplate after
every use.
• Clean the side surfaces and the power cable (1) with a slightly damp cloth.
• Dirt and burnt-on food residues on the surface of the heating zone (2) can be
cleaned off using a scraper for glass hotplates and an appropriate detergent.

8. TROUBLESHOOTING

If your induction hotplate does not work as normal, follow the instructions
below to try to solve the problem. If working through the tips below does not
fix the fault, please contact our hotline.
Risk of electric shock!
Never try to repair the device yourself.
Problem
Induction
hotplate
not working
Heating zone
(2) not getting
hot
64
Possible cause
Power cable (1) not
connected.
Child lock activated.
No pan on the heating
zone (2)
Cookware not suitable for
induction
Remedy
Connect the power cable (1)
to a live mains
socket.
Press and hold the + (10)
and - (12) buttons for
3 seconds to deactivate the
child lock.
Place a pan on the heating
zone (2).
Only use cookware which is
suitable for induction hotpla-
tes.
Newchef Go2000