Milk Function; Boost Function - newchef GO2000 Mode D'emploi

the remaining keep-warm time (starting at "120" minutes). The keep-warm
function indicator (5) lights up. While the remaining keep-warm time is
shown, the indicator (16) is lit up at the same time.
• If necessary, you can use the boost function at the same time (see below). After the
heating time of 30 seconds at full power, the device automatically switches back to the
keep-warm function.
• The milk function cannot be combined with the keep-warm function..
• While the keep-warm function is activated, press the function button
the keep-warm function and continue at power level L05.

6.6 Milk function

The milk function is used to warm milk without it burning or boiling over. The
milk gets to a temperature of 60 °C and is kept warm for 20 minutes. How to
use the milk function:
1. While the induction hob is running, press the button for the milk function
(13). The display (11) then alternates between showing "60" and the
remaining keep-warm time (starting at "20" minutes). The milk function
indicator (18) lights up. While the remaining keep-warm time is shown, the
indicator (16) is lit up at the same time.
• If necessary, you can use the boost function at the same time (see below). After the
heating time of 30 seconds at full power, the device automatically switches back to the
milk function.
• The milk function cannot be combined with the keep-warm function.
• While the milk function is activated, press the function button
• function and continue at power level L05.

6.7 Boost function

The boost function helps accelerate the cooking process. The induction
hotplate runs at full power for 30 seconds then switches back to the previous
power level, temperature or function selected. How to use the boost function:
1. Switch the induction hotplate on and select a power level, a temperature or
the milk or keep-warm function.
2. While the induction hob is running, press the button for the boost function
(14). The display (11) then shows "L10" and the indicator for the boost
function (17) lights up.
3. After 30 seconds, the induction hotplate switches back to the power level,
temperature or function previously selected.
While the boost function is activated, press the function butto
function and continue at power level L05 or temperature 120.
(9) to cancel
(9) to cancel the milk
(9) to cancel the boost
63