Troubleshooting - switel BCC2020 Manuel D'utilisation

Power lights do not come on:
If using the mains power adapters make sure they are plugged in and
switched on.
If using batteries, check they are correctly installed and not discharged.
Link light does not come on:
Check that both the Baby Unit and Parent Units are switched on.
If using batteries, check they are correctly installed and not discharged.
Link light is red:
The link between your Units is broken. You will also hear an alert to let you know
there is no communication between the Units, If this happens, check that the
mains power (or batteries) is correctly connected and that the Units are within
range of one another.
Parent Unit remains silent or very quiet:
The volume setting may be too low.
You may have pressed the Mute button.
You can hear a high pitched noise:
The Units are too close to each other, or the volume setting is too high.
Move the Parent Unit away from Baby Unit (at least 1 meter / 3 feet).
Decrease volume on the Parent Unit.

Troubleshooting