Memory Function Keystrokes; Programming Modes - Calculated Industries SCALE MASTER CLASSIC 6020 Guide De L'utilisateur

(Cont'd)
1) To reset your Custom Scale setting to
a one-to-one ratio, press [Reset] and
[Subtract/Count] simultaneously.
2) Then press the [Mode] key until the
"Custom" mode appears.
3) Begin rolling.

Memory Function Keystrokes

[Rcl] [M1+] or [Rcl] [M2x]
Displays the value stored in the memory
register.
[Reset] and [M1+] simultaneously
or
[Reset] and [M2x] simultaneously
Clears the value stored in the memory
register.
[Reset] and [Rcl] simultaneously
Clears values stored in memory registers
([M1+] and [M2x]).

Programming Modes

Custom Scale
You can program and store six Custom
Scales: three in Imperial (English) mode
and three in Metric mode.
You can set a custom scale two ways:
by "rolling in" a known distance or by
entering the exact distance.
8 – Scale Master Classic v3.0
®