Residual Heat Indication; Booster Function - F.Bertazzoni P604IM2G5NE Notice D'utilisation

Residual heat indication

After the switching off of a heating zone or the complete stop of the hob, the heating zones
are still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.

Booster function

The Booster function [ P ] and the Double Booster [
heating zone.
If this function is activated the heating zones work for 10 minutes with an ultra high Booster.
Booster is useful for example to heat up rapidly big quantities of water, like rice, pasta or
noodles.
• Start up / Stop the booster function:
Action
Zone selection
Start up the Booster
Stop the Booster
• Start up / Stop the double booster function:
Action
Selection of the zone
Start up Booster
Start up Double Booster
Stop the Double Booster
Stop Booster
• Power management:
The table is divided in 2 or 3 separate sets of heating zones, each set having a maximum power.
If the selected heating levels for both zones exceed the maximum available amount of power,
the power management function is automatically reducing the power from one of these zones.
The display of this zone is first blinking; the level is then automatically reduced to the highest
suitable position.
Heating zone selected
[ P ] is displayed
It is possible to activate the booster function (or double booster) on several cooking zones at the
same time, for this it is necessary to use the zones in a discriminant way (A-B, A-C, B-C or A-B-
C).
Control panel
Press key [ 0 ] from the zone
Press key [ B² ]
Slide on the "SLIDER"
Control panel
Press key [ 0 ]
Press key [ B² ]
Re-press key [ B² ]
Press key [ B² ]
Slide on the "SLIDER"
The other heating zone: (example: power level 9)
[ 9 ] goes to [ 8 ] and blinks
10
] adds a booster power to the selected
Display
[ 0 ]
[ P ]
[ 9 ] to [ 0 ]
Display
[ 0 ]
[ P ]
[
[ P ]
[ 9 ] to [ 0 ]
and P ]