Counters - Enerdis ULYSCOM ETHERNET MODBUS TCP Manuel Utilisateur

All key
Real Time key
Total key
Tariff 1 key
Tariff 2 key
Partial&Balance key

Counters

This area is reserved to Administrator.
This section allows to start/stop/reset partial counters of the connected counter.
Partial Counters area
Start column
Stop column
Reset column
Apply key
Cancel key
Web server • ULYSCOM ETHERNET
It allows to display all the measurements.
It allows to display only real time values.
It allows to display only total counter values.
It allows to display only tariff 1 counter values.
It allows to display only tariff 2 counter values.
It allows to display only partial and balance counter values.
Check the relevant checkbox of the partial counter to be started.
Check the relevant checkbox of the partial counter to be stopped.
Check the relevant checkbox of the partial counter to be reset.
Starts, stops or resets the partial counters according to the selected checkbox (Start, Stop, Reset).
Exits this window without saving the settings.
29