Side Handle; Rear Handle - Walter Maxi-Grinder Série Manuel D'utilisation

Tool description

Side handle

Side handle (2) may be mounted on either side of the gear housing for greater
convenience in both right and left hand operation. This handle can also be mounted
on top of the gear housing for superior comfort during cut-off operations.
For reasons of safety and better control, the side handle must always be used.

Rear handle

The rear handle can be turned 90° in either direction. This feature allows for much
improved handling during applications such as cutting and grooving.
To change the rear handle position, press button (4) and rotate handle until you feel
it click into place.
Note: The switch must be turned OFF before rotating the handle. Make sure the
handle is properly positioned and securely locked before starting the tool.
1
2
3
5
4
5
Maxi-Grinder User's Guide