Cleaning, Care And Maintenance; Signal Anode Consumption Indicator; Scaling; Troubleshooting - Stiebel Eltron SBB 301 WP Utilisation Et Installation

OPERATION

Cleaning, care and maintenance

4. Cleaning, care and maintenance
f Have the function of the safety assembly and electrical safety f
of the fitted accessories regularly checked by a qualified
contractor.
f Never use abrasive or corrosive cleaning agents. A damp f
cloth is sufficient for cleaning the appliance.
4.1

Signal anode consumption indicator

Material losses
!
If the consumption indicator changes colour from white to
red, have the signal anode checked by a heating contrac-
tor and if necessary replaced.
1
1 Signal anode consumption indicator
2 white = anode OK
3 Red = check by heating contractor required
4.2

Scaling

f Almost every type of water deposits limescale at high tem- f
peratures. This settles inside the appliance and affects both
the performance and service life. If a flanged immersion
heater is installed, the heating elements must be descaled
from time to time. A heating contractor who knows the local
water quality will tell you when the next service is due.
f Check the taps/valves regularly. You can remove limescale f
deposits at the tap outlets using commercially available des-
caling agents.
16 | SBB 301-501 WP SOL
5.
Telephone your contractor.
To facilitate and speed up your enquiry, please provide the serial
number from the type plate (000000-0000-000000):
2 3

Troubleshooting

Nr.: 000000 - 0000 - 000000
Made in Germany
www.stiebel-eltron.com