Use Of Dishwasher Salt - ELEKTRO HELIOS DI8526 Notice D'utilisation

°dH °TH
15 - 18 26 - 32
11 - 14 19 - 25
4 - 10 7 - 18
< 4 < 7
1) No use of salt required.
You must set the water softener manually and
electronically.
Manual adjustment
The appliance is set at the factory at position 2.
1
Electronic adjustment
The water softener is set at the factory at level 5.

Use of dishwasher salt

Caution! Only use dishwashers salt. Types of
salt that are not applicable for dishwashers
cause damage to the water softener.
1
6
Water hardness
mmol/l
2,6 - 3,2
1,9 - 2,5
0,7 - 1,8
< 0,7
2
Set switch to position 1
or 2.
2
Clarke manually
18 - 22 1
13 - 17 1
5 - 12 1
< 5 1)
1
1. Press and hold the start/cancel button. Turn the
programme knob clockwise until the programme
marker agrees with the first washing programme
on the control panel.
2. Release the start/cancel button when the on/off in-
dicator light and the start/cancel indicator light
start to flash.
– At the same time, the end indicator light flash-
es to show the level of the water softener.
Example:
5 flashes, pause, 5 flashes, pause, etc... = lev-
el 5
3. Press the start/cancel button one time to in-
crease the water softener level by one step.
The end indicator light shows the new level.
4. Turn the programme knob to the off position to
save the operation.
3
Fill the salt container
with 1 litre of water (only
the first operation).
Water hardness setting
electronically
4
3
2
1)
1
4