Hettich EBA 200 Mode D'emploi page 58

EN
 Press the key.
SELECT
RPM : Speed.
RAD/mm : Centrifuging radius.
It is only possible to display and input the
centrifuging radius if the RCF display
( RCF ) is activated.

 Set the desired value with the keys.
t

 Press the key.
SELECT
R : Centrifuging radius.
RCF : Relative centrifugal force

 Set the desired value with the keys.
t

 Press the key.
SELECT
DEC : Brake stage.
fast : short run-out time.
slow : long run-out time.

 Set the desired value with the keys.
t

 Press the button to save the settings.
START
PULSE
58/146
Example:
RPM display (RPM)
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
Rev. 05 / 05.2020
Example:
RCF display ( RCF )
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
AB1800DEENFRIT