Geberit AquaClean Tuma Comfort Instructions De Montage page 30

EN
Testing the anal shower
Prerequisite
– A hand is placed flat on the marked position of
the WC seat.
– The LED on the lateral control panel lights up
blue and the odour extraction unit runs. A user is
detected.
A shower cycle ends after 50 seconds. If
required, restart the shower cycle.
1
Briefly press the <Shower> button on the
lateral control panel.
ü The device performs pre-rinsing.
ü The spray arm extends.
ü The anal shower starts in oscillating
function. A small amount of water drains
into the WC ceramic appliance via the
overflow. The anal shower is active for
50 s econds.
30
2
Test adjustability of spray intensity.
3
Test shower water temperature.
ü The shower water is noticeably warm.
ü The device performs a shower cycle.
Pressing the <Shower> button again
interrupts the shower cycle.
ü After completing the shower cycle, the
spray arm retracts.
ü The device performs post-rinsing.
ü The dryer functionality starts after the
shower procedure.
If the shower water remains cold, the
device is defective. Inform customer
service.
36028798881172363-1 © 05-2017
967.304.00.0 (01)