Table des Matières
Publicité
WARNING: The brush cutter, if properly used,
is a quick, confortable and efficient tool; if used
improperly or without the due precautions it could
become a dangerous tool. So that your work is
always pleasant and safe, please respect the following
safety precautions scrupulously and throughout this
manual.
WARNING: – National regulations could limit use
of the machine.
1 - Do not operate the machine unless you have received
specific instruction on its use. First time users must
familiarise themselves thoroughly with the operation
of the machine before working in the field.
2 - The machine must only be used by adults in good
physical condition who are familiar with the operating
instructions.
3 - Never use the brush cutter when you are tired or
fatigued or if you have taken alcohol, drugs or
medication (Fig. 1).
4 - Wear appropriate clothing and safety articles such as:
boots, heavy-duty trousers, gloves, protective eyewear,
ear protection and protective helmet. Use clothing
which is close-fitting but comfortable (look pag. 12-13).
5 - Do not allow children to use the brush cutter.
6 - Do not allow other people to remain within 15 metres
during brush cutter use (Fig. 2).
7 - Before using the brush cutter, make sure that the blade
fixing bolt is well-tightened.
8 - The brush cutter must be equipped with the cutting
accessories recommended by the manufacturer (look
pag. 45).
5
SAFETY PRECAUTIONS
9 - Never use the brush cutter without the blade guard
or the head.
10 - Before starting the engine, make sure that the blade
is free to move and is not in contact with any foreign
objects.
11 - Every now and then while working, stop the engine
and check the blade. Replace it at the first sign of
cracks or breaks (Fig. 3).
12 - Only use the machine in well-ventilated places, do
not use in explosive or flammable atmospheres or in
closed environments (Fig. 4).
13 - Never touch the blade or attempt any maintenance
work while the engine is running.
14 - It is prohibited to fit any device other than that supplied
by the manufacturer.
15 - Do not use a machine that has been damaged, badly
repaired, improperly assembled or modified. Do not
attempt to remove or bypass any of the safety devices.
Only use cutting attachments indicated in the table.
16 - All labels with health hazards must be kept in good
conditions. In case of damage or deterioration,
immediately substitute them (look pag. 16-17).
17 - Do not utilize the machine for uses different from
the ones specified in the manual (look pag. 24).
18 - Never leave the machine unattended with the
engine running.
19 - Do not start the engine with the arm not mounted.
20 - Check the brush cutter daily to be sure that components
and safety devices are full functioning properly.
21 - Do not attempt to carry out operations or repairs
that are not part of the normal maintenance. See the
authorised dealer.
22 - When disposing of the machine at the end of its
English
useful life, think of the environment. Take your old
unit to your dealer who will be able to dispose of it
in a proper manner.
23 - Only experienced persons who are familiar with the
operation and safe use of this machine should use
it. If you lend the blower to someone, also give
them the instruction manual and ensure that they
read it before using the machine.
24 - All saw service, other than the operations shown in
the present manual, should be performed by
competent personnel.
25 - Keep this manual on hand and consult it before
each use of the tool.
WARNING
- Never use a machine with faulty safety equipment.
The machine's safety equipment must be checked
and maintained as described in this section. If
your machine fails any of these checks contact an
Authorised Service Centre to get it repaired.
- Any use of the machine not expressly envisaged
in this manual is to be considered improper and
therefore a source of risk to people and property.
When the motor is running, grip the front handle
firmly with your left hand and the back handle with
your right hand (Fig.5). Never use a cross-handed
grip. Left-handers should follow these instructions
too. Check that all parts of the body are kept away
from the muffler.
THESE ARE HOT ENOUGH TO CAUSE BURNS!
7
Publicité
Table des Matières
