Télécharger Imprimer la page

Teesa CUT PRO X400 Manuel D'utilisation page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
14
DE
Deutsch
Korrekte Entsorgung dieses Produkts
(Elektromüll)
(Anzuwenden in den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten
Sammelsystem)
Die Kennzeichnung auf dem Produkt bzw. auf der dazugehörigen Literatur gibt an, dass es nach seiner Lebensdauer
nicht zusammen mit dam normalen Haushaltsmüll entsorgt werden darf. Entsorgen Sie dieses Gerät bitte getrennt von
anderen Abfällen, um der Umwelt bzw. der menschilchen Gesundheit nicht durch unkontrollierte Müllbeseitigung zu
schaden. Recyceln Sie das Gerät, um die nachhaltige Wiederverwertung von stofflichen Ressourcen zu fördern. Private
Nutzer sollten den Händler, bei dem das Produkt gekauft wurde, oder die zuständigen Behörden kontaktieren, um in
Erfahrung zu bringen, wie sie das Gerät auf umweltfreundliche Weise recyceln können. Gewerbliche Nutzer sollten
sich an Ihren Lieferanten wenden und die Bedingungen des Verkaufsvertrags konsultieren. Dieses Produkt darf nicht
zusammen mit anderem Gewerbemüll entsorgt werden.
Hergestellt in China für LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.
Bedienungsanleitung
Owner's manual
Thank you for purchasing TEESA appliance. Please read this operation instruction carefully
before use, and keep it for future use. Producer does not take responsibility for damages
caused by inappropriate handling and use of the product.
In order to reduce the risk of any injury, follow basic safety precautions applied when
using any electrical device, including the following:
safetY InstRuctIons
1.
Read this instruction manual carefully, even if you are familiar with the appliance.
2.
Before connecting the device to power supply socket, make sure the voltage indicated
on the appliance corresponds to the voltage in the power supply socket.
3.
Product intended for household use only. Not for commercial use.
4.
Do not use the product for purposes/uses different from what displayed in this
operating manual.
5.
Clean and store this appliance in accordance to instructions listed in "Cleaning" and
"Storage" section.
6.
ALWAYS turn off the device and disconnect it from the mains supply:
• if it's not operating correctly,
• if there's an uncommon voice when using,
• before disassembling the device,
• before cleaning,
• before servicing.
7.
When you disconnect the power cord, grasp and pull the plug, not the cord/cable.
8.
This appliance may be used by children who are above 8 years old and by persons with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
if they are supervised and guided by a person who is responsible for their safety in a
cautious manner, and all the safety precautions are understood and followed. Children
should not play with this device. Children should not perform cleaning and servicing
of the device unsupervised.
9.
Keep the appliance out of the reach of children.
10. Fixed power cable may only be replaced in an authorized service point.
11. Keep the device and its cord/cable away from heat, water, moisture, sharp edges and
any other factor which may damage the appliance or its cord.
12. Make sure the power cord does not touch any hot or sharp elements.
13. Use only original/authorized accessories.
14. DO NOT use this appliance if the cord or the plug is damaged, or the appliance is
broken.
15. Do not attempt to repair this appliance yourself. In case of damage, contact with an
authorized service point for check-up/repair. Never disassemble this appliance.
15
EN

Publicité

loading

Produits Connexes pour Teesa CUT PRO X400

Ce manuel est également adapté pour:

Tsa0527