RDI TITAN PRO RAIL Instructions D'installation page 5

LEVEL RAIL CONTINUED
6.
Hang assembled section between posts
on installed brackets (Fig. 16) and secure
top and bottom lineals using 2 set screws
supplied with your Titan post or Titan bracket
kit in each bracket (Figs. 17, 18).
7.
Install the bracket covers as shown in
Figures 19 and 20. Install the 2 piece trim
ring shown in Figure 21. Then glue post cap
in place (Fig. 22).
(Fig. 16)
(Fig. 17)
(Fig. 18)
8.
Attach the rail support to the deck surface
using support foot screw (G) and snap the
cover in place (Fig. 23).
(Fig. 19)
(Fig. 20)
(Fig. 21)
(Fig. 22)
(Fig. 23)
5