GEL DECAL BASIC Série Notice D'utilisation Et Entretien page 43

13.1 HOW TO START PROGRAMMING - ADJUSTING OF THE WATER HARDNESS
- By pressing key
- Press keys
P.S. The value will have to be modified only by the authorized Technical Assistance
Service at the start up of the unit.
- Press key to pass to the next function CLOCK.
13.2 HOW TO ADJUST THE CLOCK
- By pressing key
to pass to the next function CLOCK (hour); the two left figures on display and the
- Press key
green Led indicating the clock function (hour) will be flashing.
- Press key
- Press key to confirm hour.
Repeat the operation to change the minutes indicated by the two right figures on display.
Press key , to pass to the next function REGENERATION TIME AND FREQUENCY.
, the figures on display and the Led indicator "Water Hardness" will be flashing.
DUREZZA ACQUA ORA
WATER HARDNESS HOUR
DURETÉ EAU HEURE
SELECT
to adjust the water hardness to the desired value.
, the figures on display and the Led indicator "Water Hardness" will be flashing.
DUREZZA ACQUA ORA
WATER HARDNESS HOUR
DURETÉ EAU HEURE
SELECT
to change hour.
MINUTI ORA RIG GIORNI
MINUTES HOUR REG DAYS
MINUTES HEURE REG JOURS
WASHING MODE
TIME
VOLUME
VOLUME-TIME
MINUTI ORA RIG GIORNI
MINUTES HOUR REG DAYS
MINUTES HEURE REG JOURS
WASHING MODE
TIME
VOLUME
VOLUME-TIME
43