Publicité
Les langues disponibles
Les langues disponibles
should be 1/3 espresso, 1/3 hot milk and
1/3 milk froth.
Separate steam function
∙ Fill the glass jug with water to the lower-
level mark and pour it into the water
container.
∙ Pour the milk to be frothed (or other
beverage to be heated) into a suitable
heat-resistant jug (fill jug to one half
max.).
∙ To froth milk, the frother must be fitted to
the steam nozzle.
∙ Position the jug underneath the steam
nozzle or milk frother in such a way that
it is just under the surface at all times.
∙ Turn the rotary control to the steam
symbol ( ).The steam nozzle is now
open.
∙ After a brief heating period, steam will
be emitted.
∙ Turn the jug with a circular motion for
around 40-45 seconds.
∙ Once the steam function is no longer
required, place a suitable container
under the steam nozzle and turn the
rotary control to the
until steam is no longer emitted.
Cleaning and care
∙ Remove the plug from the wall socket
and wait until the appliance has cooled
down.
∙ To clean the steam nozzle each time
after use, place a suitable container
underneath it and turn the rotary control
to the
position. This will release
the pressure inside the water container
and clean the steam nozzle at the same.
∙ Wipe off the milk frother with a damp
∙ To avoid the risk of electric shock, do
∙ Do not use abrasives or harsh cleaning
∙ The exterior housing may be wiped with
∙ The glass jug, filter holder, filter insert
Descaling instructions
position. Wait
Depending on the water quality (lime
content) in your area as well as the
frequency of use, all thermal household
appliances using hot water need descaling
(i.e. removal of lime deposits) on a regular
basis to ensure proper functioning. Any
warranty claim will be null and void if
the appliance malfunctions because of
insufficient descaling.
When the brewing process takes longer
than normal, it is likely that descaling is
necessary. Vinegar concentrate may be
used for descaling.
cloth once it has cooled down. It should
be frequently removed for thorough
cleaning; ensure, however, that the
appliance has sufficiently cooled
down before the frother is removed
and cleaned with hot soapy water. To
remove any remaining water from the
water container, wait until the appliance
has cooled down, remove all other
accessories and unscrew the lid. Pour
out the water through the water fill
opening.
not clean the appliance with liquids or
immerse it.
solutions.
a damp, lint-free cloth.
and drip tray may be cleaned in warm
water using a mild detergent; do not
clean these parts in a dish-washer.
17
Publicité
