Accessories; Elements Gig Bag; The E 110 Sub A & E 110 Sub Subwoofer Cover; The Ef45 Base Bag - HK Audio elements E 435 Manuel D'utilisation

Elements 1.1

4 Accessories

4.1 ELEMENTS Gig Bag

ELEMENTS gig bags help you safely transport and
stow your modules.
4.2 The E 110 Sub A & E 110 Sub
Subwoofer Cover

4.3. The EF45 Base Bag

5 Troubleshooting

The Power On LED on the EA 600 amp module
or the active subwoofer does not light up when
switched on.
• Check if the power cord is plugged into the Mains
Input.
• Check if the mains power supply is providing
current.
• Check if the house circuit breaker has tripped.
The Power On LED lights up red, but no sound is
issuing from the cabinets.
• Check the cords connected to the inputs.
• Check if all E-Connect shafts are properly engaged
in their sleeves.
• Check if the signal sources (mixer, keyboard, CD
player, etc.) are on.
• Check the other signal-routing cords for damage.
The passive subwoofer is not working.
• Check if the Speakon connector is plugged in
properly so it engages. Check the connecting cables.
The signal sounds distorted.
• Check the LED meters on your mixer. Ensure they
are not constantly in the red. If necessary, back off
the volume at the mixer.
• Observe the Limiter LED on the power amp
module's and/or E 110 Sub A subwoofer's
control panel. These may light up red, but only
intermittently. Under no circumstances may they
continuously illuminate red. If this is the case, back
off the input signal level.